BKVSQ - AS526 WATERBASED SPRAY PAINT
- MSDS: BKVSQ
- Manufacturer: H I S PAINT MANUFACTURING CO INC
- Product Name: AS526 WATERBASED SPRAY PAINT
- National Stock Number: 8010-00F017433
Product Identification
Product ID:AS526 WATERBASED SPRAY PAINT
MSDS Date:06/16/1988
FSC:8010
NIIN:00F017433
MSDS Number: BKVSQ
Responsible Party
OKLAHOMA CITY, OK 73106
Emergency Phone: (405) 232-2077
Info Phone: (405) 232-2077
Cage: FO886
Contractor
Telephone: (405) 232-2077
Cage: HISPA
Ingredients
2-BUTOXYETHANOL
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 3-7%
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
SEC-BUTYL ALCOHOL (SARA III)
CAS: 78-92-2
RTECS: EO1750000
Fraction By Weight: 1-5%
OSHA PEL 150 PPM
ACGIH TLV: 100 PPM; 9293
TRIETHYLAMINE (SARA III)
CAS: 121-44-8
RTECS: YE0175000
Fraction By Weight: 0.5-1.5%
OSHA PEL 25 PPM/15 STEL
ACGIH TLV: 10 PPM/15 STEL; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
DIMETHYL ETHER
CAS: 115-10-6
RTECS: PM4780000
Fraction By Weight: 15-40%
OSHA PEL 1000 PPM
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT): 530-1480 MG/KG (EGME)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: IRRITATION, DEFATTING, &
DERMATITIS. EYES: IRRITATION. INHALATION: DIZZINESS & NAUSEA.
INGESTION: HARMFUL.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: IRRITATION, DEFATTING, & DERMATITIS.
EYES: IRRITATION. INHALATION: DIZZINESS & NAUSEA. INGESTION:
HARMFUL.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN/EYES: FLUSH W/PLENTY OF
WATER. INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION
IN ALL CASES.
Fire Fighting
Flash Point:88-160F
Lower Limits:1.2%
Upper Limits:10%
Extinguishing Media:DRY CHEMICAL, CO2, OR FOAM.
Fire Fighting Procedures:USE WATER FROM FOGGING NOZZLES TO COOL CLOSED
CONTAINERS TO PREVENT PRESSURE BUILD-UP IF EXPOSED TO EXTREME
TEMPERATURES.
Unusual Fire/Explosion Hazard:CONTAINERS MAY EXPLODE IF EXPOSED TO
TEMPERATURES >122F. AUTOIGNITION TEMP: 473-763F.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. USE INERT
ABSORBENT MATERIAL & NON-SPARKING TOOLS. VENTILATE AREA.
Handling
Handling and Storage Precautions:STORE IN A COOL, WELL VENTILATED AREA
NOT >122F. AVOID BREATHING FUMES. DON'T PUNCTURE OR INCINERATE,
EVEN WHEN EMPTY.
Exposure Controls
Respiratory Protection:USE A CARTRIDGE TYPE RESPIRATOR.
Ventilation:LOCAL EXHAUST: RECOMMENDED
Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQUIRED
Supplemental Safety and Health
Chemical Properties
HCC:V3
Boiling Pt:B.P. Text:192-338F
Melt/Freeze Pt:M.P/F.P Text:-115 TO-75C
Vapor Pres:55-60 PSIG
Vapor Density:2.5-4.1
Spec Gravity: 1
pH: 9.1
Evaporation Rate & Reference:(BU AC =1): 0.1-12.7
Solubility in Water:37%
Appearance and Odor:CLEAR LIQUID W/ALCOHOLIC ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HOT, UNVENTILATED AREAS, TEMPERATURES
>122F, OR OTHER IGNITION SOURCES.
Hazardous Decomposition Products:HYDROCARCON FUMES, SMOKE, & CO.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. PREVENT FROM ENTERING A WATERCOURSE. DON'T
PUNCTURE OR INCINERATE CONTAINERS, EVEN WHEN EMPTY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.